Fully automatic turntable with sub-chassis and ULM tonearm. Available with and without an integrated phono preamplifier.
“Dreher”
&
“Dreher EV”
“Dreher”
&
“Dreher EV”
PHONO
output
Article No.
6217
|
LINE
output
Article No.
6219


…one of the few “fully automatic machines” made in Germany.
Through the solid MDF housing, the device is resistant to vibrations, ensuring interference-free playback. This results in a very deep and precise bass reproduction. The housing consists of a main chassis and a subchassis. The viscously damped subchassis rests within the frame, eliminating unwanted resonances at their source.
The high-quality ULM tonearm impresses with an excellent gimbal-mounted bearing. This bearing is designed with minimal friction, allowing even the finest nuances to be reproduced from the record groove.
The turntable features a fully automatic tonearm control… The arm automatically lowers onto the record at the beginning of playback and lifts off again as if by magic at the end. It then moves to the resting position, and the device switches off. Of course, the tonearm can also be used manually.

The precision-ground turntable platter is driven by a high-quality DC motor at up to three different speeds (33/45/78 RPM). The motor is electronically controlled, great for speed consistency!
The well-proven “Ortofon OM 10” magnetic cartridge has been pre-installed.



Specifications
Drive Type | Belt Drive |
Operating Voltage | 230V/50Hz, 115V/60Hz |
Power Frequency | 50/60Hz |
Power Consumption | 1.5W |
Turntable Speeds (RPM) | 33, 45, 78 |
Wow and Flutter | +/- 0.06 / 0.035 % DIN/WRMS |
Signal-to-Noise Ratio (DIN 45500) | |
Rumble Signal-to-Noise Ratio | 48 dB |
Rumble Noise Signal-to-Noise Ratio | 72 dB |
Effective Tonearm Length | 211mm |
Offset Angle | 26° |
Overhang | 19.5mm |
Tangential Tracking Error | 0.15°/cm Rad. |
Cartridge | OM 10 |
Recommended Tracking Force | 1.5mN (1.5g) |
Frequency Response | 20Hz-22kHz |
Output Voltage | 4mV / 1000Hz, 5cm/sec. |
Tracking Ability | 70um |
Cartridge Weight | 5g |
Dimensions (WxHxD) | 430x365x130mm |
Top seller
Dealer map
Note:
This page is for informational purposes only. End consumers interested in purchasing our products should contact our distribution partners.